Re: [LARTC] IMQ / how to put incoming traffic to the gateway and to

[schmurtz@netcourrier.com]

schmurtz@netcourrier.com writes:

Hi again

I'm not sure I made myself clear.

Before using IMQ I was using ingress on ppp0 and egress on eth0 to police
incoming traffic to the LAN.

Now i'm using IMQ. I would like to do something like that:

iptables -t mangle -A PREROUTING -j IMQ -i ppp0
iptables -t mangle -A FORWARD -i ppp0 -o eth0 -j MARK --set-mark 0x10
iptables -t mangle -A POSTROUTING -o eth0 -m mark --mark 0x10 -j IMQ

but it's wrong, incoming traffic to my LAN is being queued twice to imq.

Here is a simple example of what I would like to do:
2 htb classes bounded to imq0 (classid 1:10 and 1:20), i'd like to put
incoming traffic destinated to the gateway in 1:10. And incoming traffic
destinated to the NATed LAN in 1:20.


Is there a way to correctly do that ?
Is there anybody who understands me ? :-)




> My setup is:
>  LAN --(eth0)-- GW/FW --(ppp0)-- Internet
> How to distinguish incoming traffic to the gateway from the traffic to the LAN ?
> I'm using 'iptables -t mangle -A PREROUTING -j IMQ -i ppp0' to send incoming traffic to imq0
> Now I would like to put incoming traffic to the gateway and incoming traffic to the lan in two different classes.
> I tried 'iptables -t mangle -A POSTROUTING -o eth0 -m mark --mark 0x1 -j IMQ' and 'iptables -t mangle -A FORWARD -i ppp0 -o eth0 -j MARK --set-mark 0x1'
> But it's wrong because the incoming traffic to the LAN goes twice to imq0.
> Is there a way to do that correctly ?

-- 
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/