From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stef Coene Date: Wed, 11 Jun 2003 16:26:48 +0000 Subject: Re: [LARTC] DSMARK Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Wednesday 11 June 2003 17:43, Emmanuel SIMON wrote: > Hello, > > When I try to install DSMARK, I have : > # tc qdisc add dev eth0 root handle 1:0 dsmark indices 64 set_tc_index > Unknown qdisc "dsmark", hence option "indices" is unparsable > > all the qdisc are compiled as modules > the module sch_dsmark.o is loaded but unused You also need a tc binary with diffserv enabled. If you have the iproute2 source, open the file Config, enable diffserv and recompile tc. > May I ask again the questions i have already asked in case of someone see > them in this mail ? Yes :) > About DSMARK, I don't understand the way it works: > - What is the (mask, Value) ? What is it used for ? > - Does it mark the packet or the structure in the kernel ? > - If i can mark the packet, how is it done ? Can i put only 'minimize > delay', 'maximize throughput' and so on, or can i put what i want in the > TOS field (for exemple 10110111) ? > - Does it exist a howto only about DSMARK ? I can only answer the last question : not that I know. Stef -- stef.coene@docum.org "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/