From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stef Coene Date: Tue, 17 Jun 2003 17:20:25 +0000 Subject: Re: [LARTC] htb & bandwidth sharing Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Tuesday 17 June 2003 17:43, Albert Martorell wrote: > Stef Coene wrote: > > On Tuesday 17 June 2003 11:13, Albert Martorell wrote: > > > I see my first mistake has been testing directly on ethernet devices > > > without a loopback connector... Anyway I've tried with ethloop on lo > > > and the results are the same. > > > > Did you execute > > ifconfig lo mtu 1500 > > ? > > Yes I did. I've seen that for low rates in ethloop it behaves as expected. > When I increase rates to 50% of ceil rate, traffic only goes through the > first leaf class. I've tried lowering the quantum, as suggested by Orlie > Brewer, but it has not worked for me.. Can send me the scripts and ethloop commands you use? So I can try it myself. Stef -- stef.coene@docum.org "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/