From mboxrd@z Thu Jan 1 00:00:00 1970 From: Derek Sims Date: Fri, 20 Jun 2003 07:49:19 +0000 Subject: [LARTC] Help please on HTB vs CBQ for shaping on a 10Mbit link and igress Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org I am setting up some traffic shaping on a 10Mbit (bursting to 20Mbit) link. with various class rates from 2Mbit to 6Mbit My router is Intel (1GHz processor) I have configured my script using HTB, however from reading the documentation HTB appears to be using the same alogorithm as TBF, and TBF is only effective up to 1Mbit. Should I be be re-scripting to use CBQ? I am also using igress shaping ( without IMQ ) and the filter alogroriths are also TBF . Can anyone recommend a workable rule for the ratio between rate and burst for higher bandwidths? - it looks to me as though it should be around 22:1 Does the "latency" parameter cause packets to be dropped when they have been waiting more than latency ms? TIA, Derek _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/