From mboxrd@z Thu Jan  1 00:00:00 1970
From: "Miguel A. Novo" <mnovo@redisis.com>
Date: Fri, 20 Jun 2003 11:53:20 +0000
Subject: RV: [LARTC] htb problem
Message-Id: <marc-lartc-105611000024281@msgid-missing>
List-Id: <lartc.vger.kernel.org>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org




I have the same problem using tc and iptables. All traffic goes to
"default".

I tried using tcng too: (eth0 as local NIC, eth1 as Inet nic, eth1
masquerading via iptables and bridged to DSL -I have the internet IP on NIC
2-)


#include "fields.tc"
#include "ports.tc"

dev eth1 {
    egress {

            class ( <$ssh> )    if tcp_sport =  22;
            class ( <$smtp> )   if tcp_dport =  25;
            class ( <$other> )  if 1 ;

            htb {
                    class ( rate 298kbps, ceil 298kbps ) {
                        $ssh   = class ( rate 32kbps, ceil 64kbps ) { sfq; }
;
                        $smtp  = class ( rate 32kbps, ceil 290kbps ) {
sfq; } ;
                        $other = class ( rate 192kbps, ceil 298kbps ) {
sfq; } ;
                    }
            }
    }
}



But it didn't work (in this last case, I'm afraid my tcng-ing is very
incomplete. :(

--Miguel

>Hey I hve the same problem. My packets are marked, my classes are OK
>my filters are set OK
>and all packets are passing through the root class!!
>I think that this is a big problem. A know 1 more person that has the same
>problem!<br><br>

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/