From mboxrd@z Thu Jan 1 00:00:00 1970 From: "rio@martin.mu" Date: Wed, 25 Jun 2003 13:33:23 +0000 Subject: RE: [LARTC] Linux router and Bandwidth control Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org If you put your friends in NAT (Private IP), no problem .. They have webserver, all you have to do is forward packets going to port 80 to private ip:80 Further more read iptables-howto Regards, Rio Martin. Original Message: ----------------- From: Joe ox_in@gmx.net Date: Wed, 25 Jun 2003 17:51:51 +0530 To: lartc@mailman.ds9a.nl Subject: [LARTC] Linux router and Bandwidth control Hello All, I have 1.5Mbits Backbone connection with 16 public ip address. I like to provide share my connection with someother my friends how will have public ip addess. So i wanted to configre linux router with bandwidth controll for my friends connection. Actully i tried with single interface in linux and CBQ but it does not controll. I should do not use NAT as my friends are running web servers. Is it possible to configure in linux.or some links to configure this Advance thanks Joe _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ -------------------------------------------------------------------- mail2web - Check your email from the web at http://mail2web.com/ . _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/