Re: [LARTC] Linux router and Bandwidth control

["Joe" <ox_in@gmx.net>]

Hello Martin,

Currently i am using this configuration.

In future they may run mail server then i have to go for new configuration
where i have to give them the public ip address.

Thanks
Sathyan

If you put your friends in NAT (Private IP), no problem ..
They have webserver, all you have to do is forward packets going to port 80
to private ip:80
Further more read iptables-howto

Regards,
Rio Martin.



Original Message:
-----------------
From: Joe ox_in@gmx.net
Date: Wed, 25 Jun 2003 17:51:51 +0530
To: lartc@mailman.ds9a.nl
Subject: [LARTC] Linux router and Bandwidth control


Hello All,

I have 1.5Mbits Backbone connection with 16 public ip address.

I like to provide share my connection with someother my friends how will
have public ip addess.

So i wanted to configre linux router with bandwidth controll for my friends
connection.

Actully i tried with single interface in linux and CBQ but it does not
controll.

I should do not use NAT as my friends are running web servers.

Is it possible to configure in linux.or some links to configure this

Advance thanks
Joe


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

--------------------------------------------------------------------
mail2web - Check your email from the web at
http://mail2web.com/ .


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/



_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/