From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Joe" Date: Wed, 25 Jun 2003 15:23:56 +0000 Subject: Re: [LARTC] Linux router and Bandwidth control Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hello Leigh, Thanks, I will look into this configuration and i will get back to you tomorrow. Regards, Joe > Hey Joe, > > One configuration is to configure your linux box as an ethernet bridge > between your client machines and the public router > > |===| > | PC 1 | > |===|\ > \ > |===| \ |====| |====| > | PC 2 |---O------| LINUX |-------------| ROUTER | > |===| / |====| |====| > / > |===|/ > | PC 3 | > |===| > > and then make use of the "WRR" qdisc to control the traffic. > > There are obviously many other possibilities, but this is the method I am currently > testing, so I thought I would make you aware of it's existence. > > The link for more info is http://wipl-wrr.sourceforge.net/ > > Leigh > > > > Hello All, > > > > I have 1.5Mbits Backbone connection with 16 public ip address. > > > > I like to provide share my connection with someother my friends how will > > have public ip addess. > > > > So i wanted to configre linux router with bandwidth controll for my friends > > connection. > > > > Actully i tried with single interface in linux and CBQ but it does not > > controll. > > > > I should do not use NAT as my friends are running web servers. > > > > Is it possible to configure in linux.or some links to configure this > > > > Advance thanks > > Joe > > > > > > _______________________________________________ > > LARTC mailing list / LARTC@mailman.ds9a.nl > > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ > > > > _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/