From mboxrd@z Thu Jan  1 00:00:00 1970
From: Patrick McHardy <kaber@trash.net>
Date: Thu, 26 Jun 2003 13:23:19 +0000
Subject: Re: [LARTC] Combining ingress and egress ( IMQ+HTB)
Message-Id: <marc-lartc-105663392105321@msgid-missing>
List-Id: <lartc.vger.kernel.org>
References: <marc-lartc-105656633611826@msgid-missing>
In-Reply-To: <marc-lartc-105656633611826@msgid-missing>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

Hi Rajesh,
it should work fine with the latest version, just direct both directions to
the same imq device. If you're successful it would be nice if you can drop
me a short note.

Thanks,
Patrick

Rajesh Srivastava wrote:

>I am successfully running ingress (IMQ) and egress (HTB) shaping on a
>bridge.
>
>Is there any way to combine and share the bandwidth between ingress and
>egress?
>
>Example:
>I have set up www service for egress at 128 KB and ingress at 256 KB. The
>shaping on them works fine separately. However, I want to create a single
>virtual pipe for www traffic and limit both ingress and egress combined to
>256 KB.
>
>Thanks.
>
>Rajesh
>
>
>_______________________________________________
>LARTC mailing list / LARTC@mailman.ds9a.nl
>http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>  
>

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/