From mboxrd@z Thu Jan  1 00:00:00 1970
From: Nikolay Datchev <nik@varna.net>
Date: Fri, 27 Jun 2003 12:48:18 +0000
Subject: Re: [LARTC] does tc support mpls ?
Message-Id: <marc-lartc-105671820128786@msgid-missing>
List-Id: <lartc.vger.kernel.org>
References: <marc-lartc-105669822406875@msgid-missing>
In-Reply-To: <marc-lartc-105669822406875@msgid-missing>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

I assume that your current ethernet card speed is 100 Mbit/s

Just do

mii-tool eth0 -A 10BaseT

and this will set your card to 10BaseT-only speeds.

If you get an error, your card does not support MII.

And, at last, this is not the right maillist for this question.

-- Nikolay Datchev

On Fri, 27 Jun 2003, olagoke Metibemu wrote:

> HELLO ALL,
> I WILL BE VERY HAPPY IS ANY BODY ON THISLIST CAN TELL ME HOW TO SET MY ETHERNET LAN SPEED TO 10MBPS ON A REDHAT BOX.
>
>
> THANKS
>
>
>
> GOKE
> NEWBIE
>
> Ashutosh Pattanaik <ashutosh.pattanaik@einfinitus.com> wrote:
> hi everybody,
> i just want to know if tc provides any bandwidth management through the
> tc_index field of the sk_buff or the exp bits of the shim header in an mpls
> cloud ? if so ,how it is done?
> ashutosh.
>
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>
>
> ---------------------------------
> Do you Yahoo!?
> SBC Yahoo! DSL - Now only $29.95 per month!

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/