From mboxrd@z Thu Jan  1 00:00:00 1970
From: Brad Lay <brad@coombabah.net>
Date: Sat, 28 Jun 2003 05:51:14 +0000
Subject: Re: [LARTC] does tc support mpls ?
Message-Id: <marc-lartc-105677958906287@msgid-missing>
List-Id: <lartc.vger.kernel.org>
References: <marc-lartc-105669822406875@msgid-missing>
In-Reply-To: <marc-lartc-105669822406875@msgid-missing>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

On Fri, 27 Jun 2003, Nikolay Datchev wrote:

> I assume that your current ethernet card speed is 100 Mbit/s
>
> Just do
>
> mii-tool eth0 -A 10BaseT

Or you could do,
tc qdisc add dev ethX root tbf rate 10Mbit latency 50ms burst 1540

(I'm really not sure about latency and burst, because I usually have the
rate set at 220kbit. YMMV).

> -- Nikolay Datchev
>
> On Fri, 27 Jun 2003, olagoke Metibemu wrote:
>
> > HELLO ALL,
> > I WILL BE VERY HAPPY IS ANY BODY ON THISLIST CAN TELL ME HOW TO SET MY ETHERNET LAN SPEED TO 10MBPS ON A REDHAT BOX.
> >
> > THANKS
> >
> > GOKE
> > NEWBIE

Regards,

Brad Lay ( brad /at/ coombabah.net )

 W) http://coombabah.net/

"I used to be indecisive, now I'm not so sure."
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/