From mboxrd@z Thu Jan 1 00:00:00 1970 From: Martin Devera Date: Thu, 03 Jul 2003 09:18:34 +0000 Subject: Re: [LARTC] HTB burstable for 2 interface , how ? Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org you probably need IMQ if eth0 is input for your case On Thu, 3 Jul 2003, rio@martin.mu wrote: > Dear folks, > Here goes my bandwidth manager: > > INTERNET > | > |eth0 202.14.41.1 > BW.Manager > | | > | +----eth1----192.168.1.0/24 > | > +------eth2----192.168.2.0/24 > > Total incoming bandwidth to eth0 is 1024kbps > should be shared to eth1 and eth2, which mean each get 512Kbps and > burstable to 1024Kbps if other host is idle. > > My question is how do i apply HTB to these situation ? > As far as i know eth1 and eth2 should be define as parent and cannot be as > children. > > Regards, > Rio Martin. > > > > -------------------------------------------------------------------- > mail2web - Check your email from the web at > http://mail2web.com/ . > > > _______________________________________________ > LARTC mailing list / LARTC@mailman.ds9a.nl > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/ > > > _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/