From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?ISO-8859-15?Q?Dorneles_Trem=E9a?= Date: Fri, 04 Jul 2003 14:27:00 +0000 Subject: Re: [LARTC] Routing SMTP traffic Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org Hi Eric, thanks for response... ;-) > you mark packet going to port 25 and you want to refirect packet coming > from port 25 (response packet). > You don't have any connection tracking with mark. If you want some > you've got to use CONNMARK. Ops... no, I receive packets normally by port 25 on eth0. It's incomming traffic. I just want to send my outgoing smtp traffic with eth1 (packets generated by my mail server). > By the way : will your ADSL ISP accept to route the packet coming from > an other IP ? Hey, I'm the ISP... :-) I'm just trying to route the outgoing SMTP traffic by a cheap ADSL link, keeping the main link as free as possible. Thanks in advance. Regards, --=20 Dorneles Trem=E9a Caxias do Sul - RS - Brasil +55 54 9114 9312 - UIN: 2413568 X3ng Web Technology -----BEGIN GEEK CODE BLOCK----- Version: 3.12 GCS/IT d- s:->: a23 C+++ UBL++++$ P--- L++ E-- W+++ N++ o? K? w+ O M+ V-- PS+ PE- Y-- PGP++ t+ 5 X++ R+ tv+ b(++) DI+ D++ G+>+++ e++>++++ h---- r+++ y+++** ------END GEEK CODE BLOCK------ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/