From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stef Coene Date: Mon, 07 Jul 2003 10:23:08 +0000 Subject: Re: [LARTC] HTB doesn't respect rate values Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Monday 07 July 2003 06:16, Leonardo Balliache wrote: > At 01:05 a.m. 06/07/03 +0200, you wrote: > > Hi, Sergiusz: > >I make a test: > >I send an email - it goes to default class 1:3. Then (during email is > >sent) I get e big file through www. What happen? WWW rate is 30-70kbit. > >So it doesn't keep his guaranted rate 122kbit. It lends his rate for > >SMTP. When SMTP stops sending his packets, WWW gets 100%. > > If your HTB configuration is working well (HTB works really very well) you > have to wait some time that TCP flows get stable. How long your test last? > How heavy is your e-mail? Did you leave enough time to www to reclaim its > rights? How strong is your www flow? Are you measuring average or > instantaneous rates? Also, check out my tests on www.docum.org. Just to prove that it's working. You can even use my test scripts and adapt them to your needs. Stef -- stef.coene@docum.org "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/