Re: [LARTC] OUTPUT chain marking after or before routing?

["Catalin Borcea" <catalin@electricant.ambra.ro>]

But how can I bind these rules to a interface when I don't know to what
interface the locally generated packets will arrive? In fact, this is the
purpose of marking the packets: to route them to the ppp0 interface.

- catalin -

----- Original Message -----
From: "???????? ?????" <skekes@pylones.gr>
To: "Catalin Borcea" <catalin@electricant.ambra.ro>
Cc: <lartc@mailman.ds9a.nl>
Sent: Thursday, July 17, 2003 9:37 AM
Subject: Re: [LARTC] OUTPUT chain marking after or before routing?


> Well catalin, try to add theese rules with the in the prerouting chain
> but bind theese rules with the interfaces you have.
> Without binding netfilter rules with interfaces  it will not work, and
> you'll get the results you allready got.
> Catalin Borcea wrote:
>
> >Hello,
> >I tried to mark the packets in the PREROUTING chain but still doesn't
work.
> >Now the packets are no marked anymore when they go out by the eth2
> >interface. When I marked them in the OUTPUT chain they arrived also to
the
> >eth2 interface but marked. According to the docs the PREROUTING chain is
not
> >traversed by locally generated packets so, I don't know how this works
for
> >you. Maybe you have forwarded packets and not locally generated packets.
> >
> >
>
>
>
>


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/