From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Rio Martin." Date: Tue, 22 Jul 2003 02:36:57 +0000 Subject: [LARTC] Shape both incoming and outgoing traffic with HTB ? Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Dear all, I want to shape both incoming and outgoing traffic with HTB. Since the first time i applied HTB, i only limit incoming traffic from internet, while the outgoing traffic is unlimited and now these days my outgoing traffic really getting higher. INTERNET ----- eth0 | BW.MANAGER | eth1 --- LAN #!/bin/sh tc qdisc del dev eth0 root tc qdisc del dev eth1 root tc qdisc add dev eth1 root handle 1 htb default 0 r2q 50 tc class add dev eth1 parent 1: classid 1:2 htb rate 120Kbit ceil 120Kbit tc qdisc add dev eth1 parent 1:2 handle 2 sfq perturb 10 quantum 1500 tc filter add dev eth1 parent 1:0 protocol ip prio 100 u32 match ip src 0.0.0.0/0 match ip dst 192.168.0.0/19 classid 1:2 tc qdisc add dev eth0 root handle 2 htb default 0 r2q 50 tc qdisc add dev eth0 parent 2:10 handle 10 sfq perturb 10 quantum 1500 tc class add dev eth0 parent 2: classid 2:10 htb rate 20Kbit ceil 20Kbit tc filter add dev eth0 parent 2:0 protocol ip prio 100 u32 match ip src 192.168.0.0/19 match ip dst 0.0.0.0/0 classid 2:10 #End of script I applied, but none of outgoing traffic match class 2:10 I need help about this, Regards, Rio Martin. - "When in doubt, tell the truth." -- Mark Twain _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/