From mboxrd@z Thu Jan 1 00:00:00 1970 From: Damion de Soto Date: Fri, 25 Jul 2003 06:59:43 +0000 Subject: Re: [LARTC] WonderShaper on spesific ports? Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Wizzcat wrote: --snip--- > wondering if there is a way to limit uploads speeds on only certain > ports so I could limit only p2p programs from going overboard and let > the rest of the computer continue uploading at full bandwith. it should be fairly simple the emule ports are listed here: http://www.emule-project.net/faq/ports.htm and in the top of the wondershaper script, it allows you to enter # low priority source ports NOPRIOPORTSRC # low priority destination ports NOPRIOPORTDST -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Damion de Soto - Software Engineer email: damion@snapgear.com SnapGear --- ph: +61 7 3435 2809 | Custom Embedded Solutions fax: +61 7 3891 3630 | and Security Appliances web: http://www.snapgear.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/