From mboxrd@z Thu Jan  1 00:00:00 1970
From: "hare ram" <hareram@sol.net.in>
Date: Sat, 26 Jul 2003 11:36:22 +0000
Subject: Re: [LARTC] bandwidth shaping over multiple WAN links
Message-Id: <marc-lartc-105922497819949@msgid-missing>
List-Id: <lartc.vger.kernel.org>
References: <marc-lartc-105921202013273@msgid-missing>
In-Reply-To: <marc-lartc-105921202013273@msgid-missing>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

Hi

Yes, you can achive the same with  RH 8.0 also.
yes iam using multiple ethernet  for internet side ( backbone side)
and one ethernet for LAN side
and loadbalancing all the links..

iam refereing

http://www.ssi.bg/~ja/nano.txt

with the help of  julian, i have achived this for load balancing

for shaping the b/w best places are

www.lartc.org
www.docum.org ( stef)

will help you lot

best of luck

hare
----- Original Message -----
From: "Madhuri Patwardhan" <madhuri@cc.iitb.ac.in>
To: "hare ram" <hareram@sol.net.in>
Cc: <lartc@mailman.ds9a.nl>
Sent: Saturday, July 26, 2003 4:12 PM
Subject: Re: [LARTC] bandwidth shaping over multiple WAN links


>
>
> We are using redhat 8.0, however we can switch to redhat 9.0 if required.
>
> So you have one linux box with multiple ethernet cards each connected to a
> seperate WAN link and you are doing traffic shaping over these links?
>
> I have read about load balancing with 'teq' or something like that with
> linux. Are you refering to that?
>
> Madhuri
>
>
> On Sat, 26 Jul 2003, hare ram wrote:
>
> > Hi Madhuri
> >
> > yes its possible,
> >
> > you can make all link one big pipe and share the load  equally
> >
> > to do this you need to add some patches to you kernel
> >
> > you did not mention what distro are you using
> >
> > iam using redhat 9.0, with multiple links working fine
> >
> >
> > best of luck
> >
> > hare
> >
> > ----- Original Message -----
> > From: "madhuri" <madhuri@cc.iitb.ac.in>
> > To: <lartc@mailman.ds9a.nl>
> > Sent: Saturday, July 26, 2003 3:09 PM
> > Subject: [LARTC] bandwidth shaping over multiple WAN links
> >
> >
> > >
> > > Hi,
> > >
> > > We have three WAN links each of capacity 2 Mbps.
> > >
> > > There is a one linux box per link which is used for NAT and firewall.
So
> > > I have three linux boxes and three WAN links to talk to the internet.
> > >
> > > We want to do bandwidth shaping over these three links. I know
> > > individually we can do bandwidth shaping for a particular WAN link
using
> > > linux tc tool. I can repeat the same bandwidth shaping commands for
> > > other two links also. However it would be better if I can treat three
> > > links as one big WAN pipe and do the bandwidth shaping for all of them
> > > at one place. Is it possible?
> > >
> > > I am just thinking aloud and not sure if that is possible or not.
> > >
> > >
> > > Thanks,
> > > Madhuri
> > >
> > > _______________________________________________
> > > LARTC mailing list / LARTC@mailman.ds9a.nl
> > > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
> > >
> >
> > _______________________________________________
> > LARTC mailing list / LARTC@mailman.ds9a.nl
> > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
> >
>
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/