From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andreas Klauer Date: Fri, 01 Aug 2003 17:28:16 +0000 Subject: Re: [LARTC] HTB for multiple users, good or bad approach? Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Am Friday 01 August 2003 17:39 schrieb Stef Coene: > > The script I've come up with so far can be found there: > > http://www.metamorpher.de/files/ipshape.sh I updated the script. > Some remarks. You define a burst on your 1:1 class. You > don't need this. I bet there are lots of thinks which I don't need. I'm not familiar with any of these parameters, mainly I'm just more or less playing around with it. I removed this. > And make sure that the sum of the rate of > child classes = rate of parent class. I tried that. I noticed that I was wrong at one spot, but it should fit now, unless there are some rounding errors (which, hopefully, do not have such a bad impact on things). > Also, limit all bandwidth too less then your link > bandwidth so YOU are the botleneck How much less would you recommend? I subbed 5% of link bandwith for now. > Using different prio's for you htb classes can be tricky. > Remove the prio parameters untill you understand what the > different prio's does. Yes, now that I read the FAQ on your page, I guess my prio values were all to high. They're all between 0-7 now, I hope thats better. If I understand the prio right, I need them, because I want the interactive connections to take as much bandwidth as they can get, even if the users are quite active themselves too... I also raised their rates. I reckon, though, that these settings still require lots of tweaking... > For the quantum problem, see the faq pages on www.docum.org I read your FAQ before, and I'm sure I still don't understand it fully. I use some (mostly randomly chosen) quantum values now, just to make these messages vanish... hopefully they make any sense... Thank you very much for your feedback! -- Andreas Klauer _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/