From mboxrd@z Thu Jan 1 00:00:00 1970 From: Steffen Moser Date: Tue, 19 Aug 2003 09:42:20 +0000 Subject: Re: [LARTC] Please check the follow script for diffserv Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hi Damion, * On Tue, Aug 19, 2003 at 09:41 AM (+1000), Damion de Soto wrote: > Raghuveer wrote: > > >I feel it gets the interface bandwidth. > > yes, it does. > you need the interface bandwidth for the cbq qdisc: > http://lartc.org/howto/lartc.qdisc.classful.html#AEN935 Given a 10 Mbit/s ethernet device (eth0) which is used to establish a PPP over ethernet (PPPoE) connection (ppp0) to a broadband ISP (e.g. using ADSL, SDSL and so on as an underlaying system). If I then want to shape the traffic I send to the "ppp0" interface, which bandwidth would be used for setting up a CBQ? I suppose that here the "virtual" (e.g. limited by the ISP) bandwidth of my "ppp0" connection (e.g. 128 kbit/s) is the interesting one, not the bandwidth of my "eth0" (10 Mbit/s), because the CBQ is attached to the "ppp0" device and has nothing to do with the underlaying "eth0". Is this assumption correct? TIA, Steffen _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/