From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stef Coene Date: Thu, 21 Aug 2003 18:20:44 +0000 Subject: Re: [LARTC] CBQ_bandwidth Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Thursday 21 August 2003 06:58, Raghuveer wrote: > Thanks alot Stef, Its very clear to me now. > If I have ADSL with different incoming and outgoing rates. For egress > shaping at WAN(eth0) interface, Whether should I use outgoing rates or > combined rates (incomming + outgoing). Will it make any big difference > if I use combined rates in an asymmetric link like cabel modem, ADSL etc. At eth0, you should take outgoing rates. And this can be assymetric from incoming rates. Why not ? I didn't knew your incoming and outgoing rates so I just took 512kbit for incoming and outgoing. Stef -- stef.coene@docum.org "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.oftc.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/