From mboxrd@z Thu Jan 1 00:00:00 1970 From: Raghuveer Date: Fri, 22 Aug 2003 05:29:50 +0000 Subject: Re: [LARTC] CBQ_bandwidth Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Stef Coene wrote: >On Thursday 21 August 2003 06:58, Raghuveer wrote: > > >>Thanks alot Stef, Its very clear to me now. >>If I have ADSL with different incoming and outgoing rates. For egress >>shaping at WAN(eth0) interface, Whether should I use outgoing rates or >>combined rates (incomming + outgoing). Will it make any big difference >>if I use combined rates in an asymmetric link like cabel modem, ADSL etc. >> >> >At eth0, you should take outgoing rates. And this can be assymetric from >incoming rates. Why not ? >I didn't knew your incoming and outgoing rates so I just took 512kbit for >incoming and outgoing. > > How can I get the incomming and outgoing rates seperately ...? Regards -Raghu >Stef > > > _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/