From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Jay Lee" Date: Mon, 25 Aug 2003 23:19:09 +0000 Subject: [LARTC] Server stop receiving traffic Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org I've tried hard to find answers to below questions without any luck. Please help me! 1. If I do not specify burst, server stops receiving traffic after 5~10 mins. But if I specify burst value to 1500, the server never dies but the performance is very bad. What would be the best burst rate?? 2. If I enter 1500 as burst or cburst, tc show command shows it as 1499. Why is this happening? #tc class add dev eth0 parent 1:1 classid 1:404 htb rate 14kbit ceil 128kbit quantum 1501 burst 1501 cburst 1501 #tc class show dev eth0 .... class htb 1:404 parent 1:1 prio 0 rate 14Kbit ceil 128Kbit burst 1500b cburst 1500b .... #tc class add dev eth0 parent 1:1 classid 1:404 htb rate 14kbit ceil 128kbit quantum 1500 burst 1500 cburst 1500 #tc class show dev eth0 .... class htb 1:404 parent 1:1 prio 0 rate 14Kbit ceil 128Kbit burst 1499b cburst 1499b .... _________________________________________________________________ Surf the net and talk on the phone with Xtra Jetstream @ http://www.xtra.co.nz/products/0,,5803,00.html ! _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/