From mboxrd@z Thu Jan 1 00:00:00 1970 From: Damion de Soto Date: Thu, 28 Aug 2003 23:39:20 +0000 Subject: Re: [LARTC] kernel panic when using imq/htb Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Toshiro Viera wrote: > 4. The server's eth0 ip address is 10.5.220.220/16; I logon on to it > (using ssh) from 10.5.1.150, then I try to edit (using vim) the script > described in 3) and I get the kernel panic. > > Anybody know what could be the cause of this strange behaviour? Are the > rules defined above wrong? > Any hint/suggestion/etc will be welcome :) I'm thinking one of two things, either a) when you're ssh'ed in, and then open vim, it sends a certain (too much?) amount of traffic through whatever qdisc/class ssh goes through, and this is causing your kernel problem - try doing ls in a large directory, or cat'ting a largish text file. does the panic still occur ? b) you've got some bug in your kernel and/or vim, that's only evident when you've loaded the imq modules - try running vim in the same circumstance with the imq module loaded, but no queues setup, then add one at a time. good luck. -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Damion de Soto - Software Engineer email: damion@snapgear.com SnapGear --- ph: +61 7 3435 2809 | Custom Embedded Solutions fax: +61 7 3891 3630 | and Security Appliances web: http://www.snapgear.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/