From mboxrd@z Thu Jan 1 00:00:00 1970 From: Rio Martin Date: Tue, 09 Sep 2003 02:48:29 +0000 Subject: Re: [LARTC] CBQ.init Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-2022-jp" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Tuesday 09 September 2003 09:42, Mitsuru MIZUTANI wrote: > Hello everyone, > I am using CBQ.init to shape bandwidth but I have a problem. > Linux PC2 (192.168.0.10) > +---------------------+ > |eth0 192.168.0.1 | ← Linux router > |---------------------| > |eth1 192.168.1.1 | > +---------------------+ > Linux PC1 (192.168.1.10) > I want to limit bandwidth from "Linux PC1" to "Linux PC2" > more than 10Mbps. > So I set CBQ.init following like this. > /etc/rc.d/CBQ.init > DEVICE=eth0,100Mbit,10Mbit > RATEMbit > WEIGHT=1Mbit > PRIO=5 > When I set RATE=6Mbit,I can limit bandwidth 6Mbps. > But I set RATE=7Mbit,8Mbit,... > I can limit bandwidth only 6.95Mbps everytime. > Why? > Could you tell me how to limit bandwidth more than 7Mbps. Have you checked link quality before you applied CBQ and after you applied CBQ qdisc ? Perhaps this is caused by your switch, cable, etc. Once you have checked it all, than we consider to take CBQ as the problem. Regards, Rio Martin. _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/