From mboxrd@z Thu Jan 1 00:00:00 1970 From: Damion de Soto Date: Tue, 09 Sep 2003 23:44:00 +0000 Subject: Re: [LARTC] newbie - shaping a PSTN connection Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Daniel Horth wrote: > Hi - I've been going through the LARTC how-to and have successfully used the > sample scripts (and wondershaper) with my xDSL links. Are you using the cbq or htb shaping scripts ? > I've been attempting to use the wondershaper script with this PSTN > connection - but don't seem to be able to improve latency at all. doing a > bit of research I've only really found references to shaping broadband > connections. Surely shaping of PSTN ppp connections is equally (probably > more) applicable? If you're using low bandwidth values with the htb qdisc, you might have to change the r2q parameter - see http://luxik.cdi.cz/~devik/qos/htb/manual/userg.htm > I would also appreciate being shown where I might find a searchable archive > of this list. just use google on http://mailman.ds9a.nl/pipermail/lartc/ regards -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Damion de Soto - Software Engineer email: damion@snapgear.com SnapGear --- ph: +61 7 3435 2809 | Custom Embedded Solutions fax: +61 7 3891 3630 | and Security Appliances web: http://www.snapgear.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/