From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stef Coene Date: Mon, 22 Sep 2003 18:25:05 +0000 Subject: Re: [LARTC] Sequence and Default port Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Monday 22 September 2003 13:25, Raghuveer wrote: > Hi All, > > I have following queries :-- > > 1. For indicating any default IP we are placing 0/0 as src or dst in the > tc script, similarly what can I use for default port....?. This is the > scenario when rules are framed based on ports. For example, For a > firewall with eth0(WAN), eth1(LAN) and eth2(DMZ), Iam doing CBQ outgoing > (egress) traffic shaping at eth0 interface for public hosted servers > located at eth2(DMZ) based on ports(80 for http etc). Now I want to > frame a rule for remaining traffic (default) allocating remaining > bandwidth(total rate is 512Kbits, 256 Kbits provided to the hosted > servers, rest 256KBits is for other traffic). My rules for identifying > the hosted servers is based entirely on src port. Hence what rule should > I frame for all other traffic coming from eth1(LAN). There is no such thing as default port. But I don't understand why you need this. I think it can be done with the dst/src parameter. > 2. Is the rule sequence play any role, like if there is any conflict > between the rules then the last rule will be given preference. what > happens exactly if there is any conflict...? The first rule that's a match wil be followed. Order is based on prio and the order they are entered. Stef -- stef.coene@docum.org "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/