From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stef Coene Date: Wed, 24 Sep 2003 16:29:48 +0000 Subject: Re: [LARTC] IMQ Install Without Recompiling Kernel? Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Wednesday 24 September 2003 01:35, Walter D. Wyndroski wrote: > I mostly figured that. Does anyone on the list have any idea when RH may or > may not incorporate IMQ into their stock kernel? Mandrake is not an option > for us as we run RedHat on over ten servers. We are too far entrenched in > RH as well as satisfied overall with it. > > I'm really needing the ability to ingress and egress on a subnet, actually > multiple subnets. Primarily I need to ratelimit said subnet no mater which > of the nine interfaces (in my router) from which it's traffic is leaving or > entering the router. However, I still classful queuing using HTB/SFQ. Are > any other options available which could assist me until IMQ becomes part of > the RH stock kernel? Ask RH:) Why don't you take the RH kernel source, apply the imq patch, use the RH kernel options and recompile the kernel? Stef -- stef.coene@docum.org "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/