From mboxrd@z Thu Jan  1 00:00:00 1970
From: Lance Dryden <lance@jound.net>
Date: Thu, 25 Sep 2003 02:14:35 +0000
Subject: [LARTC] Proper filter syntax for matching Netfilter packet marks
Message-Id: <marc-lartc-106445619630626@msgid-missing>
List-Id: <lartc.vger.kernel.org>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

Howdy.  Sorry if I make a mistake; this is my first list posting.

I'm running into ... somewhat conflicting and incomplete documentation 
when working out what exactly I'm to do in order to tc-filter match 
against packet MARKs set by NetFilter.

The syntax I'm trying looks like this:
   tc filter add dev eth1 \
   protocol ip \
   parent 1:0 \
   prio 1 \
   handle 0x66 \
   fw classid 1:102

But it apparently isn't working right; this is the only filter in an 
egress HTB queue discipline, and all my traffic goes through the default 
class instead of my special class.  This is as per "tc -s -d class show ..."

   Thanks for your time,
   Lance Dryden

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/