From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stef Coene Date: Thu, 25 Sep 2003 09:07:18 +0000 Subject: Re: [LARTC] Proper filter syntax for matching Netfilter packet marks Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Thursday 25 September 2003 04:14, Lance Dryden wrote: > Howdy. Sorry if I make a mistake; this is my first list posting. > > I'm running into ... somewhat conflicting and incomplete documentation > when working out what exactly I'm to do in order to tc-filter match > against packet MARKs set by NetFilter. > > The syntax I'm trying looks like this: > tc filter add dev eth1 \ > protocol ip \ > parent 1:0 \ > prio 1 \ > handle 0x66 \ > fw classid 1:102 > > But it apparently isn't working right; this is the only filter in an > egress HTB queue discipline, and all my traffic goes through the default > class instead of my special class. This is as per "tc -s -d class show > ..." Can you check your iptables ruls so you are sure the mark gets placed? Stef -- stef.coene@docum.org "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/