From mboxrd@z Thu Jan 1 00:00:00 1970 From: Damion de Soto Date: Thu, 25 Sep 2003 23:12:41 +0000 Subject: Re: [LARTC] Linux router configuration?? Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Blu wrote: > Good morning at all, thanks for previous help, but I have another ask. I > have a few experience of Linux world's, and I need to configure a Linux > PC as router, what are the steps? What do I do? That's a pretty vague question, so I'll give you a vague answer: Get any linux distribution and do a minimum install. Setup the network cards and interfaces. setup the routes and/or routing daemons (setup the firewalling) In the popular distros, most of these steps are done for you in the install. good luck. -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Damion de Soto - Software Engineer email: damion@snapgear.com SnapGear --- ph: +61 7 3435 2809 | Custom Embedded Solutions fax: +61 7 3891 3630 | and Security Appliances web: http://www.snapgear.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ --- Free Embedded Linux Distro at http://www.snapgear.org --- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/