From mboxrd@z Thu Jan 1 00:00:00 1970 From: Thomas Kirk Date: Thu, 09 Oct 2003 08:42:51 +0000 Subject: [LARTC] Wondershaper modifications Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hep Dear Listmembers and Stef! Setup Internet eth0 | | ----------------- | | | | eth1 eth2 eth3 eth4 <--- Lan .10/24 .11/24 etc All Lans are natted to eth0 Now i use wondershaper (1.1a) on eth0 to shap interactive traffic (work allready thanks!) But i have a special requirments for priorities samba traffic from eth1 to internet. Ive done this with the following lines in iptables and wondershaper : iptables : $IPTABLES -A PREROUTING -t mangle -p tcp --dport 137:139 -i eth1 -j MARK --set-mark 2 $IPTABLES -A PREROUTING -t mangle -p udp --dport 137:139 -i eth1 -j MARK --set-mark 2 wondershaper : tc filter add dev $DEV parent 1:0 protocol ip prio 1 handle 2 fw classid 1:10 This setup seems to work partly. When i browser network on anohter host over internet i get no lag and fast response (low latency). But when i try to edit file (3kb) it takes around 10 seconds to save the file? Since my connection is 2048/512 and ive set my UPLINKE0 it should take no more than 1-2 secs to update a file over internet? What am i overlooking here? -- Venlig hilsen/Kind regards Thomas Kirk ARKENA tlf/phone +4570233456 thomas(at)arkena(dot)com Http://www.arkena.com "It's naive to think you can change a person--except maybe that boy who works in the library." -- Lisa Simpson _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/