From mboxrd@z Thu Jan 1 00:00:00 1970 From: jeremie le-hen Date: Thu, 09 Oct 2003 11:46:59 +0000 Subject: Re: [LARTC] newbie question Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org > in this schema in what device i should implement shapping (htb) > > ISP-----eth0 -eth1----LAN If you implement your shaping/scheduling on eth1, then your LAN will be affected, but not the Linux box itself. If you want your gateway to be affected too, then put it on eth0. Furthermore, if one day you choose to add another LAN on eth2, shapping will also work for the latter without any additional configuration. Regards, -- Jeremie LE HEN aka TtZ/TataZ jeremie.le-hen@epita.fr ttz@epita.fr Hi! I'm a .signature virus! Copy me into your ~/.signature to help me spread! _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/