From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stef Coene Date: Thu, 09 Oct 2003 16:51:14 +0000 Subject: Re: [LARTC] Wondershaper modifications Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Thursday 09 October 2003 10:42, Thomas Kirk wrote: > Hep Dear Listmembers and Stef! > > Setup > > Internet > eth0 > > > ----------------- > > eth1 eth2 eth3 eth4 <--- Lan .10/24 .11/24 etc > > > All Lans are natted to eth0 > > Now i use wondershaper (1.1a) on eth0 to shap interactive traffic > (work allready thanks!) But i have a special requirments for > priorities > samba traffic from eth1 to internet. Ive done this with the following > lines in iptables and wondershaper : > > iptables : > > $IPTABLES -A PREROUTING -t mangle -p tcp --dport 137:139 -i eth1 -j > MARK --set-mark 2 > $IPTABLES -A PREROUTING -t mangle -p udp --dport 137:139 -i eth1 -j > MARK --set-mark 2 > > wondershaper : > > tc filter add dev $DEV parent 1:0 protocol ip prio 1 handle 2 fw > classid 1:10 > > This setup seems to work partly. When i browser network on anohter > host over internet i get no lag and fast response (low latency). > But when i try to edit file (3kb) it takes around 10 seconds to save > the file? Since my connection is 2048/512 and ive set my UPLINKE0 it > should take no more than 1-2 secs to update a file over internet? What > am i overlooking here? Can you check the timeout with a simple ping? And what about making a directory or copying a file ? Stef -- stef.coene@docum.org "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/