From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stef Coene Date: Fri, 10 Oct 2003 20:49:43 +0000 Subject: Re: [LARTC] Problem with tc filter (tc qdisc/class works ok) Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Friday 10 October 2003 22:06, Praveen Mehrotra wrote: > # tc filter add dev imq0 parent 10:0 protocol ip \ > prio 1 u32 match u32 00100000 00ff0000 at 0 \ > flowid 1:10 > > All commands except the last one work fine. soyou have an error in your filter statement. I have the same error if I execute it on my box. I'm not familiar with the u32 syntax, but check out the docs for examples. I think you copied this filter command from the lartc howto, but it's not working for me either. Stef -- stef.coene@docum.org "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/