From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jose Luis Domingo Lopez Date: Sat, 11 Oct 2003 15:57:59 +0000 Subject: Re: [LARTC] >10Mbit on HTB Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Saturday, 11 October 2003, at 21:28:10 +0700, Kristiadi Himawan wrote: > Below is the script: > [snipped] > The script seems correct, and very similar to what I use, except I don't even need to set up a "filter" to direct traffic, because in my tests I just need to limit the output to some speed. > When i try to shape 20Mbit, there's dropped packet but i see the bandwidth not shaped to 20Mbit. > But when shape to 10Mbit, i see the bandwidth down to 13Mbit. > Some time ago there was a report from someone who tried HTB in 2.5.x kernels and saw a strange behaviour. For details, check: http://bugme.osdl.org/show_bug.cgi?ide7 In short, it seems bandwidth limiting behaves strange for different outgoing packet sizes. Regards. -- Jose Luis Domingo Lopez Linux Registered User #189436 Debian Linux Sid (Linux 2.6.0-test6-mm4-lirc) _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/