From mboxrd@z Thu Jan 1 00:00:00 1970 From: Catalin BOIE Date: Thu, 16 Oct 2003 12:28:04 +0000 Subject: Re: [LARTC] tc filter expression Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org > > I think you can use ingress + policy + ds to mark packets (DSCP IP field) > > on eth0 and eth2. Then on eth1 you can classify base on this field. > > Could you give me an example of how this could be done? The DSMARK > documentation that I have found is a bit difficult. I can't find any > examples of marking in ingress, and if I understand you right, you > think that it is possible to mark all packets in ingress on let's say > eth0 (provider 1), and then classify based on that mark in egress of > eth1 (internal iface). Hi, Niels! I have no working example. I said that in theory. I didn't tried myself. [10 minutes passed] I check a little more and seems it's not possible to set the mark using ingress. Stef, am I wrong? > > > Regards, > Niels V. Christensen > --- Catalin(ux) BOIE catab@deuroconsult.ro _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/