From: Dragos Cinteza <Dragos_Cinteza@web.de>
To: lartc@vger.kernel.org
Subject: =?unknown-8bit?q?r=C3=A3spuns?= la: "[LARTC] Pakets marked but no shapeing is done" din 10/20/2003
Date: Tue, 21 Oct 2003 19:49:35 +0000 [thread overview]
Message-ID: <marc-lartc-106677947531319@msgid-missing> (raw)
--==----==----==----==----==----==----==----==----==----==--
Stef> On Monday 20 October 2003 17:40, Dragos Cinteza wrote:
>> Here it is now in plain text, just pls help me understand, cuz seems
>> verry ilogic what happends. Sorry for sending this 3 times. I hope it
>> is ok now.
Stef> Euh. I don't see a tc filter statement. And where is the iptables line that
Stef> matches the packets ??? Also, post your tc commands and your iptables rules.
Stef> Stef
========================================
In the last mail I only put the results of listing chains and classes.
This it is how the chains are made:
echo 0 > /proc/sys/net/ipv4/conf/all/rp_filter
echo 0 > /proc/sys/net/ipv4/conf/all/accept_redirects
echo 0 > /proc/sys/net/ipv4/conf/all/accept_source_route
echo 1 > /proc/sys/net/ipv4/conf/all/log_martians
# Reduce DoS'ing ability by reducing timeouts
echo 30 > /proc/sys/net/ipv4/tcp_fin_timeout
echo 0 > /proc/sys/net/ipv4/tcp_window_scaling
echo 0 > /proc/sys/net/ipv4/tcp_timestamps
echo 0 > /proc/sys/net/ipv4/tcp_sack
echo 1024 > /proc/sys/net/ipv4/tcp_max_syn_backlog
# Flush all rules and delete all custom chains
/sbin/iptables -F
/sbin/iptables -t nat -F
/sbin/iptables -t mangle -F
/sbin/iptables -X
/sbin/iptables -t nat -X
/sbin/iptables -t mangle -X
# Set up policies
/sbin/iptables -P INPUT DROP
#Modificata din ACCEPT in DROP pt access selectiv cu exceptia HTTP
/sbin/iptables -P FORWARD DROP
/sbin/iptables -P OUTPUT ACCEPT
/sbin/iptables -t nat -P PREROUTING ACCEPT
# This chain will log, then DROPs "Xmas" and Null packets which might
# indicate a port-scan attempt
/sbin/iptables -N PSCAN
/sbin/iptables -A PSCAN -p tcp -m limit --limit 10/minute -j LOG --log-prefix "TCP Scan? "
/sbin/iptables -A PSCAN -p udp -m limit --limit 10/minute -j LOG --log-prefix "UDP Scan? "
/sbin/iptables -A PSCAN -p icmp -m limit --limit 10/minute -j LOG --log-prefix "ICMP Scan? "
/sbin/iptables -A PSCAN -f -m limit --limit 10/minute -j LOG --log-prefix "FRAG Scan? "
/sbin/iptables -A PSCAN -j DROP
# Disallow packets frequently used by port-scanners, XMas and Null
/sbin/iptables -A INPUT -p tcp --tcp-flags ALL ALL -j PSCAN
/sbin/iptables -A FORWARD -p tcp --tcp-flags ALL ALL -j PSCAN
/sbin/iptables -A INPUT -p tcp --tcp-flags ALL NONE -j PSCAN
/sbin/iptables -A FORWARD -p tcp --tcp-flags ALL NONE -j PSCAN
# Limit Packets- helps reduce dos/syn attacks
/sbin/iptables -A INPUT -p tcp -m tcp --tcp-flags SYN,RST,ACK SYN -m limit --limit 10/sec
# CUSTOM chains, can be used by the users themselves
/sbin/iptables -N CUSTOMINPUT
/sbin/iptables -A INPUT -j CUSTOMINPUT
/sbin/iptables -N CUSTOMFORWARD
/sbin/iptables -A FORWARD -j CUSTOMFORWARD
/sbin/iptables -t nat -N CUSTOMPREROUTING
/sbin/iptables -t nat -A PREROUTING -j CUSTOMPREROUTING
# Accept everyting connected
/sbin/iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
/sbin/iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT
# localhost and ethernet.
/sbin/iptables -A INPUT -i lo -j ACCEPT
/sbin/iptables -A INPUT -p icmp -j ACCEPT
/sbin/iptables -A INPUT -i $GREEN_DEV -s 192.168.1.1 -m mac --mac-source 00-02-44-67-30-30 -j ACCEPT
/sbin/iptables -A INPUT -i $GREEN_DEV -s 192.168.1.2 -m mac --mac-source 00-02-44-67-30-5E -j ACCEPT
/sbin/iptables -A INPUT -i $GREEN_DEV -s 192.168.1.3 -m mac --mac-source 00-02-44-59-71-40 -j ACCEPT
/sbin/iptables -A INPUT -i $GREEN_DEV -s 192.168.1.4 -m mac --mac-source 00-D0-09-D5-6B-12 -j ACCEPT
/sbin/iptables -A INPUT -i $GREEN_DEV -s 192.168.1.5 -m mac --mac-source 00-50-FC-9D-7A-5B -j ACCEPT
/sbin/iptables -A INPUT -i $GREEN_DEV -s 192.168.1.6 -m mac --mac-source 00-80-5F-8F-C2-48 -j ACCEPT
/sbin/iptables -A INPUT -i $GREEN_DEV -s 192.168.1.7 -m mac --mac-source 00-06-4F-05-FB-16 -j ACCEPT
/sbin/iptables -A FORWARD -i $GREEN_DEV -s 192.168.1.1 -m mac --mac-source 00-02-44-67-30-30 -j ACCEPT
/sbin/iptables -A FORWARD -i $GREEN_DEV -s 192.168.1.2 -m mac --mac-source 00-02-44-67-30-5E -j ACCEPT
/sbin/iptables -A FORWARD -i $GREEN_DEV -s 192.168.1.3 -m mac --mac-source 00-02-44-59-71-40 -j ACCEPT
/sbin/iptables -A FORWARD -i $GREEN_DEV -s 192.168.1.4 -m mac --mac-source 00-D0-09-D5-6B-12 -j ACCEPT
/sbin/iptables -A FORWARD -i $GREEN_DEV -s 192.168.1.5 -m mac --mac-source 00-50-FC-9D-7A-5B -j ACCEPT
/sbin/iptables -A FORWARD -i $GREEN_DEV -s 192.168.1.6 -m mac --mac-source 00-80-5F-8F-C2-48 -j ACCEPT
/sbin/iptables -A FORWARD -i $GREEN_DEV -s 192.168.1.7 -m mac --mac-source 00-06-4F-05-FB-16 -j ACCEPT
/sbin/iptables -A CUSTOMFORWARD -s 213.157.170.39 -d 192.168.1.5 -j ACCEPT
/sbin/iptables -A CUSTOMFORWARD -s 193.108.54.37 -d 192.168.1.5 -j ACCEPT
/sbin/iptables -A CUSTOMFORWARD -s 213.157.170.39 -d 192.168.1.5 -j ACCEPT
/sbin/iptables -A CUSTOMFORWARD -s 213.157.170.39 -j DROP
/sbin/iptables -A CUSTOMFORWARD -s 193.108.54.37 -j DROP
/sbin/iptables -A CUSTOMFORWARD -s 128.242.207.197 -j DROP
/sbin/iptables -A CUSTOMFORWARD -s 80.86.96.1 -j DROP
/sbin/iptables -A CUSTOMFORWARD -s 213.157.170.39 -j DROP
/sbin/iptables -t mangle -A PREROUTING --in-interface $GREEN_DEV -s 192.168.1.1 -j MARK --set-mark 1
/sbin/iptables -t mangle -A PREROUTING --in-interface $GREEN_DEV -s 192.168.1.2 -j MARK --set-mark 2
/sbin/iptables -t mangle -A PREROUTING --in-interface $GREEN_DEV -s 192.168.1.3 -j MARK --set-mark 3
/sbin/iptables -t mangle -A PREROUTING --in-interface $GREEN_DEV -s 192.168.1.4 -j MARK --set-mark 4
/sbin/iptables -t mangle -A PREROUTING --in-interface $GREEN_DEV -s 192.168.1.5 -j MARK --set-mark 5
/sbin/iptables -t mangle -A PREROUTING --in-interface $GREEN_DEV -s 192.168.1.6 -j MARK --set-mark 6
/sbin/iptables -t mangle -A PREROUTING --in-interface $GREEN_DEV -s 192.168.1.7 -j MARK --set-mark 7
/sbin/iptables -t mangle -A PREROUTING --in-interface $GREEN_DEV -m mac --mac-source 00-02-44-67-30-30 -j MARK --set-mark 1
/sbin/iptables -t mangle -A PREROUTING --in-interface $GREEN_DEV -m mac --mac-source 00-02-44-67-30-5E -j MARK --set-mark 2
/sbin/iptables -t mangle -A PREROUTING --in-interface $GREEN_DEV -m mac --mac-source 00-02-44-59-71-40 -j MARK --set-mark 3
/sbin/iptables -t mangle -A PREROUTING --in-interface $GREEN_DEV -m mac --mac-source 00-D0-09-D5-6B-12 -j MARK --set-mark 4
/sbin/iptables -t mangle -A PREROUTING --in-interface $GREEN_DEV -m mac --mac-source 00-50-FC-9D-7A-5B -j MARK --set-mark 5
/sbin/iptables -t mangle -A PREROUTING --in-interface $GREEN_DEV -m mac --mac-source 00-80-5F-8F-C2-48 -j MARK --set-mark 6
/sbin/iptables -t mangle -A PREROUTING --in-interface $GREEN_DEV -m mac --mac-source 00-06-4F-05-FB-16 -j MARK --set-mark 7
/sbin/iptables -A INPUT -i ipsec+ -j ACCEPT
/sbin/iptables -A FORWARD -i ipsec+ -j ACCEPT
# Custom prerouting chains (for transparent proxy and port forwarding)
/sbin/iptables -t nat -N SQUID
/sbin/iptables -t nat -A PREROUTING -j SQUID
/sbin/iptables -t nat -N PORTFW
/sbin/iptables -t nat -A PREROUTING -j PORTFW
# last rule in input and forward chain is for logging.
/sbin/iptables -A INPUT -m limit --limit 10/minute -j LOG --log-prefix "INPUT "
/sbin/iptables -A FORWARD -m limit --limit 10/minute -j LOG --log-prefix "OUTPUT "
# Accept everyting connected
/sbin/iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
# localhost and ethernet.
/sbin/iptables -A INPUT -i lo -j ACCEPT
/sbin/iptables -A INPUT -i $GREEN_DEV -j ACCEPT
$GREEN_DEV is the LAN interface
and here are the tc commands:
# clean existing down- and uplink qdiscs, hide errors
tc qdisc del dev eth1 root 2> /dev/null > /dev/null
tc qdisc del dev eth1 ingress 2> /dev/null > /dev/null
tc qdisc del dev eth0 root 2> /dev/null > /dev/null
tc qdisc del dev eth0 ingress 2> /dev/null > /dev/null
tc qdisc add dev eth1 root handle 10: htb r2q 1
tc class add dev eth1 parent 10: classid 10:10 htb rate 125kbit ceil 125kbit quantum 2250 burst 60k
tc class add dev eth1 parent 10:10 classid 10:1 htb rate 18kbit ceil 125kbit quantum 1500 prio 2 burst 60k
tc filter add dev eth1 parent 10: protocol ip handle 1 fw classid 10:1
tc filter add dev eth1 parent 10: protocol ip prio 2 u32 match ip src 192.168.1.1 flowid 10:1
tc filter add dev eth1 parent 10: protocol ip prio 3 u32 match ip dst 192.168.1.1 flowid 10:1
tc class add dev eth1 parent 10:10 classid 10:2 htb rate 18kbit ceil 125kbit quantum 1500 prio 2 burst 60k
tc filter add dev eth1 parent 10: protocol ip handle 1 fw classid 10:1
tc filter add dev eth1 parent 10: protocol ip prio 2 u32 match ip src 192.168.1.2 flowid 10:2
tc filter add dev eth1 parent 10: protocol ip prio 3 u32 match ip dst 192.168.1.2 flowid 10:2
tc class add dev eth1 parent 10:10 classid 10:3 htb rate 18kbit ceil 125kbit quantum 1500 prio 2 burst 60k
tc filter add dev eth1 parent 10: protocol ip handle 3 fw classid 10:3
tc filter add dev eth1 parent 10: protocol ip prio 2 u32 match ip src 192.168.1.3 flowid 10:3
tc filter add dev eth1 parent 10: protocol ip prio 3 u32 match ip dst 192.168.1.3 flowid 10:3
tc class add dev eth1 parent 10:10 classid 10:4 htb rate 18kbit ceil 125kbit quantum 1500 prio 2 burst 60k
tc filter add dev eth1 parent 10: protocol ip handle 4 fw classid 10:4
tc filter add dev eth1 parent 10: protocol ip prio 2 u32 match ip src 192.168.1.4 flowid 10:4
tc filter add dev eth1 parent 10: protocol ip prio 3 u32 match ip dst 192.168.1.4 flowid 10:4
tc class add dev eth1 parent 10:10 classid 10:5 htb rate 20kbit ceil 125kbit quantum 1500 prio 2 burst 60k
tc filter add dev eth1 parent 10: protocol ip handle 5 fw classid 10:5
tc filter add dev eth1 parent 10: protocol ip prio 2 u32 match ip src 192.168.1.5 flowid 10:5
tc filter add dev eth1 parent 10: protocol ip prio 3 u32 match ip dst 192.168.1.5 flowid 10:5
tc class add dev eth1 parent 10:10 classid 10:6 htb rate 18kbit ceil 125kbit quantum 1500 prio 2 burst 60k
tc filter add dev eth1 parent 10: protocol ip handle 6 fw classid 10:6
tc filter add dev eth1 parent 10: protocol ip prio 2 u32 match ip src 192.168.1.6 flowid 10:6
tc filter add dev eth1 parent 10: protocol ip prio 3 u32 match ip dst 192.168.1.6 flowid 10:6
tc class add dev eth1 parent 10:10 classid 10:7 htb rate 18kbit ceil 125kbit quantum 1500 prio 3 burst 60k
tc filter add dev eth1 parent 10: protocol ip handle 7 fw classid 10:7
tc filter add dev eth1 parent 10: protocol ip prio 2 u32 match ip src 192.168.1.7 flowid 10:7
tc filter add dev eth1 parent 10: protocol ip prio 3 u32 match ip dst 192.168.1.7 flowid 10:7
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
reply other threads:[~2003-10-21 19:49 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-106677947531319@msgid-missing \
--to=dragos_cinteza@web.de \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.