From mboxrd@z Thu Jan 1 00:00:00 1970 From: Stef Coene Date: Tue, 28 Oct 2003 18:12:24 +0000 Subject: Re: [LARTC] Need help with HTB Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org On Monday 27 October 2003 23:37, Mihai Tanasescu wrote: > I currently have a 128kbps cable link to the internet..and I'm sharing > this connection with others. > I've made the following script(for alocating bandwidth depending on the > services used: browsing, squid, games like counter-strike, icmp, ssh), > which unfortunately isn't working very well as the response times I'm > getting upon pinging the server are almost the same I get without the > htb script being loaded. > Any ideas ? > > 2. > > I have the same problem with a htb script on an adsl connection (with > the htb script I get ping response times of 80-90..without it I get > 200-300 ms...but these response times aren't very stable..it's > something > like I'm getting 40 ms..then 100 ms..then 50 ms..) > > Sorry about the size of this message. No problem. I don't see a problem with your script, but can you also post the output of tc -s -d class show dev eth0. And for eth1? Stef -- stef.coene@docum.org "Using Linux as bandwidth manager" http://www.docum.org/ #lartc @ irc.openprojects.net _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/