From mboxrd@z Thu Jan 1 00:00:00 1970 From: Marcelo Date: Wed, 05 Nov 2003 10:52:11 +0000 Subject: [LARTC] Re: dead onlink Message-Id: List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hello people: I've implemented the script for load balancing of "Linux Advanced Routing & Traffic Control HowTo" on this structure: ------------------linux gateway (subnet 1) ! linux router ------------------intranet (subnet 2) ! ------------------linux gateway2 (subnet 3) ! ------------------intranet (subnet 4) and I've a question: When I run the next command : "ip route" I get the folowing information: -------------- 192.168.0.32/27 dev eth0 proto kernel scope link src 192.168.0.33 192.168.0.96/27 dev eth2 proto kernel scope link src 192.168.0.97 192.168.0.64/27 dev eth1 proto kernel scope link src 192.168.0.65 192.168.0.128/27 dev eth3 proto kernel scope link src 192.168.0.129 127.0.0.0/8 dev lo scope link default nexthop via 192.168.0.126 dev eth2 weight 1 dead onlink nexthop via 192.168.0.61 dev eth0 weight 1 ----------------------------- Is normal the part of "dead onlink" ? This message is always there but the 192.168.0.126 gateway is online. Do I need the Julian's dead gateway detection patch?. Thanks in advance. Marcelo. _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/