From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Chijioke Kalu" Date: Mon, 10 Nov 2003 18:46:09 +0000 Subject: Re: [LARTC] Parent rate=ceil Limit not respected Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Thanks Stef, but then, what bandwidth should I place on the first class, 10mbit or 90Kbit? am re-writing the script to follow what you've just suggested, it will look like this... root (1:0) | class (1:2) (10mbit or 90Kbit or nothing ?) / \ class (1:3) class (1:4) (LAN Traffic) (10Mbit) (90Kbit) (Internet Traffic) | | ------------------------- ----------------------- | | | 1:10 1:11 - 1:31 1:50 (high prio icmp,ack) (sys01 ... sys20) (default) 1. Is this what you're asking? 2. Is there any other improvements I can make on the script to make it efficient? Thanks K _________________________________________________________________ Frustrated with dial-up? Get high-speed for as low as $26.95. https://broadband.msn.com (Prices may vary by service area.) _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/