Re: [LARTC] Compiling TCNG (tcsim)

From: Scott Mansfield <thephantom@mac.com>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] Compiling TCNG (tcsim)
Date: Sun, 16 Nov 2003 05:18:45 +0000	[thread overview]
Message-ID: <marc-lartc-106896023028510@msgid-missing> (raw)
In-Reply-To: <marc-lartc-106894240419206@msgid-missing>

Hello Nelson,

It looks like you grabbed and unpacked the kernel sources but didn't do 
a 'make config' (or 'make xconfig').  IIRC you need to do this at least 
once in a new kernel source tree because these programs create the asm 
symlink and some extra config headers in include/config and 
include/linux/modules.

Also, make sure /usr/include/linux and /usr/include/asm point to your 
correct kernel source tree.

Cheers,
Scott

On Nov 15, 2003, at 4:18 PM, Nelson E. Castillo wrote:

> Hi,
>
> I really would like to use tcng.
> (it seems it's the right place to ask...)
>
> I try to build it like this:
>
> $ cd tcsim
> $ wget ftp://ftp.kernel.org/pub/linux/kernel/v2.4/linux-2.4.22.tar.bz2
> $ bzcat linux-2.4.22.tar.bz2 | tar xf -
>
> $ ln -s linux-2.4.22 linux
>
> $ wget 
> ftp://ftp.inr.ac.ru/ip-routing/iproute2-2.4.7-now-ss010824.tar.gz
> $ tar xfz iproute2-2.4.7-now-ss010824.tar.gz
> $ cd ..
> $ ./configure
>
> Reading configuration defaults from ./config
> building tcsim:      yes
> Kernel source:       /home/admin/tcng/tcsim/linux
> Kernel version:      2.4.22
> iproute2 source:     /home/admin/tcng/tcsim/iproute2
> iproute2 version:    010824
> Host byte order:     little endian
> tcc command:         /home/admin/tcng/bin/tcc
> building the manual: NO
> install directory:   /usr/local
>
> $ make
>
> (snip)
>
> make -f Makefile.unclean tcsim
> make[2]: Entering directory `/home/admin/tcng/tcsim'
> cc -g -Wall -Wstrict-prototypes -Wmissing-prototypes 
> -Wmissing-declarations -I../shared -Iklib -Iklib/include 
> -Iulib/iproute2/include -I. -DVERSION=\"`cat ../VERSION`\" 
> -DTOPDIR=\"/home/admin/tcng\" -DTCC_CMD=\"/home/admin/tcng/bin/tcc\" 
> -DKFULLVERSION=\"2.4.22\" -DKFULLVERSIONNUM=`printf "0x%02x%02x%02x" 2 
> 4 22` -DIVERSION=\"010824\"   -c -o tcsim.o tcsim.c
> In file included from /usr/include/bits/sigcontext.h:28,
>                  from /usr/include/signal.h:326,
>                  from tcsim.c:14:
> /usr/include/asm/sigcontext.h:79: error: parse error before '*' token
> /usr/include/asm/sigcontext.h:82: error: parse error before '}' token
> make[2]: *** [tcsim.o] Error 1
> make[2]: Leaving directory `/home/admin/tcng/tcsim'
> make[1]: *** [tcsim] Error 2
> make[1]: Leaving directory `/home/admin/tcng/tcsim'
> make: *** [all] Error 1
>
> Any clue?
>
> I'm including a detailed report with the versions of the packages.
>
> I updated my system.... Now I run Debian unstable.
> What system is tcng being developed on?
>
> Thanks,
> Nelson.-
>
> -- 
> http://geocities.com/arhuaco
>
> The first principle is that you must not fool yourself
> and you are the easiest person to fool.
>      -- Richard Feynman.
>

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/