From mboxrd@z Thu Jan 1 00:00:00 1970 From: Damion de Soto Date: Tue, 18 Nov 2003 00:37:50 +0000 Subject: Re: [LARTC] Re: Wondershaper problem... Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Leandro Andrade Travaglia wrote: > I'm using the ADSL/Cable Wondershaper 1.1 but the last class (1:30) > is always empty. > The other 2 classes have some traffic.... but the 1:20 is receiving the > most of it... > Is this the class that bulk traffic goes right? No, Bulk traffic goes into 1:20 1:30 is super-slow for specific hosts you define. look at the top of the # low priority OUTGOING traffic - you can leave this blank if you want # low priority source netmasks NOPRIOHOSTSRC# low priority destination netmasks NOPRIOHOSTDST# low priority source ports NOPRIOPORTSRC# low priority destination ports NOPRIOPORTDST It's doing exactly what it should be doing. regards, -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Damion de Soto - Software Engineer email: damion@snapgear.com SnapGear --- ph: +61 7 3435 2809 | Custom Embedded Solutions fax: +61 7 3891 3630 | and Security Appliances web: http://www.snapgear.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ --- Free Embedded Linux Distro at http://www.snapgear.org --- _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/