From mboxrd@z Thu Jan  1 00:00:00 1970
From: Robert Kurjata <rkurjata@ire.pw.edu.pl>
Date: Wed, 26 Nov 2003 20:22:17 +0000
Subject: Re: [LARTC] qdisc on bridge?
Message-Id: <marc-lartc-106987869308061@msgid-missing>
List-Id: <lartc.vger.kernel.org>
References: <marc-lartc-106987643205360@msgid-missing>
In-Reply-To: <marc-lartc-106987643205360@msgid-missing>
MIME-Version: 1.0
Content-Type: text/plain; charset="windows-1252"
Content-Transfer-Encoding: quoted-printable
To: lartc@vger.kernel.org

Witaj Jon,

W Twoim li=9Ccie datowanym 26 listopada 2003 (20:51:29) mo=BFna przeczyta=
=E6:




JZ> I've set up bridging between two interfaces and this gives me a new
JZ> "br0".  When I apply qdiscs to it, what am I controlling - traffic out =
of
JZ> eth1 or traffic headed out eth2?

JZ> Should I not be using br0 and refer to eth1 and eth2?

just use eth1 and eth2 to control traffic not a virtual br0 device.

JZ> _______________________________________________
JZ> LARTC mailing list / LARTC@mailman.ds9a.nl
JZ> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/



--=20
Pozdrowienia,
 Robert

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/