From mboxrd@z Thu Jan  1 00:00:00 1970
From: Damjan <gdamjan@mail.net.mk>
Date: Wed, 26 Nov 2003 20:09:57 +0000
Subject: Re: [LARTC] qdisc on bridge?
Message-Id: <marc-lartc-106988106211138@msgid-missing>
List-Id: <lartc.vger.kernel.org>
References: <marc-lartc-106987643205360@msgid-missing>
In-Reply-To: <marc-lartc-106987643205360@msgid-missing>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lartc@vger.kernel.org

> I've set up bridging between two interfaces and this gives me a new 
> "br0".  When I apply qdiscs to it, what am I controlling - traffic out of
> eth1 or traffic headed out eth2?
> 
> Should I not be using br0 and refer to eth1 and eth2?

yes, this is true. Use eth1 and eth2 not br0.



-- 
Damjan Georgievski
jabberID: damjan@bagra.net.mk
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/