From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Mihai Vlad" Date: Tue, 02 Dec 2003 15:42:40 +0000 Subject: [LARTC] Multiple connections Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org I hope I am not that pushy, but I cannot figure this out. If 2 of my clients are downloading from the internet one file each, the splitting works and one client gets 64kbps and the other 64kbps. If one of those 2 clients are downloading by means of a Download Manager (like Flash Get or Download Accelerator) every gets messed up. The one downloading with multiple connections gets 90-95% of the bandwidth and the other client gets almost nothing. In my opinion if I have 2 clients downloading at the same time, the sum of all the connections from each other would have to be 64kbbit. Please tell me what I have to change to make sure that the splitting works ok. I am sure for you this is a piece of cake but for me it's a nightmare :) This is the script that I use. $TC qdisc add dev $LAN_IFACE root handle 1: htb default 30 $TC class add dev $LAN_IFACE parent 1: classid 1:1 htb rate 128kbit ceil 128kbit burst 80k #--------default--------- $TC class add dev $LAN_IFACE parent 1:1 classid 1:30 htb rate 1kbit ceil 128kbit burst 80k $TC qdisc add dev $LAN_IFACE parent 1:30 handle 300: sfq perturb 10 #-----clients...------------- $TC class add dev $LAN_IFACE parent 1:1 classid 1:11 htb rate 8kbit ceil 128kbit burst 80k $FILTER_IP 192.168.0.121 flowid 1:11 $TC qdisc add dev $LAN_IFACE parent 1:11 handle 110: sfq perturb 10 $TC class add dev $LAN_IFACE parent 1:1 classid 1:13 htb rate 8kbit ceil 96kbit burst 80k $FILTER_IP 192.168.0.123 flowid 1:13 $TC qdisc add dev $LAN_IFACE parent 1:13 handle 130: sfq perturb 10 etc... _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/