From mboxrd@z Thu Jan 1 00:00:00 1970 From: Suraj Shankar Date: Sat, 06 Dec 2003 07:19:55 +0000 Subject: Re: [LARTC] How to config ip in 2nd lan card in Linux pc and config ip masq? Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org Hi, --- "Md.Ahsanul Haque Chowdhury" wrote: > (192.168.1.1). But after install the Linux 7.2 in how did you get a copy of Linux 7.2? ;) i'll safely assume thats RHL 7.2 ... > /etc/sysconfig/network- > scripts/ only showing ifcfg-eth0 no interface is > showing like ifcfg-eth1. 'netconfig' would be your best bet. Also, check dmesg, to see that you card has been detected. If the card is detected, you can copy ifcfg-eth0 to ifcfg-eth1 and make the appropriate changes. > & how to config ip masq to route to get Internet in > local workstations.? ...just use iptables to masq. your internal subnet; man iptables. suraj. __________________________________ Do you Yahoo!? Free Pop-Up Blocker - Get it now http://companion.yahoo.com/ _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/