From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Mindaugas Riauba" Date: Thu, 11 Dec 2003 11:51:25 +0000 Subject: Re: [LARTC] Problems with HTB shaping Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org > it would be helpful to see whether it does the same if > HTB is not shaping (increase rate to 100mbit) and if it > is not bridge but router. When HTB is not shaping (0 dropped packets) difference is smaller but still considerable. ifconfig - 63510398 bytes tc - 61854134 bytes Packet rates are much closer but what is strange - tc value is higher. ifconfig - 532493 packets tc - 536796 packets And if I'll be able I'll test the same configuration as router. But not today. > It is important where did u read the HTB counters. On Qdisc, > inner class or leaf ? Regarding HTB's rate counter - it > is averaged over long time to that its result is always > approximate. Counters were read from SFQ qdisc. But HTB class counters difference is practically the same. Mindaugas _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/