From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Mindaugas Riauba" Date: Fri, 12 Dec 2003 14:06:13 +0000 Subject: Re: [LARTC] Problems with HTB shaping Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lartc@vger.kernel.org > Depends WHAT do you want to know. All should be correct but > each shows different things. I want to know number of bytes sent by specific customer. Customer corresponds to SFQ leaf. > In bridging scenario there may be other issues (I didn't > tested it). > Counter on upper qdisc shows packets received and leaf > counts when transmitting. > ifconfig counts reallu send packets - it may be smaller > if NIC can't send packet (error). > If you think there is bug then test with routing setup first, > I have no time to test with bridge. Tested with routed setup - the same problem. When there are only TCP or only UDP data streams everything wents fine. But if I use one TCP and one UDP stream - counters start to differ. If I add 3rd TCP stream - difference between ifconfig and tc counters increases. If 3rd stream is UDP - difference decreases. If you think that taht could help - I think I can provide root access to this box. Mindaugas _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/