From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Edgar Estrada Lopez" Date: Tue, 16 Dec 2003 04:31:48 +0000 Subject: [LARTC] Question Message-Id: List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lartc@vger.kernel.org Hello: I need some help on split access and load balancing: I have 2 xDSL (eth1 @ wireless broadband modem; and ppp0, actually=20 connected to eth0 on a phone DSL). Both links have dynamic addresses. I was reading the examples in the HOWTO: --- copied from the howto --- ip route add $P1_NET dev $IF1 src $IP1 table T1 ip route add default via $P1 table T1 ip route add $P2_NET dev $IF2 src $IP2 table T2 ip route add default via $P2 table T2 --- end copy -- this is awesome... is there any script that could convert these vars=20 ($P1_NET, etc) into the REAL values of my 2 dsl connections? I'm still not too good at coding in Linux... can anyone help me? Thanks in advance Edgar _________________________________________________________________ MSN Fotos: la forma m=E1s f=E1cil de compartir e imprimir fotos. =20 http://photos.msn.es/support/worldwide.aspx _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/